User's Manual

10
8
A-1
HD
HE
HA
HE
9
HC
C
HE
Connect five Large Red Tubes (A-1) at the top by
sliding a
1 3/4” Bolt (HA) through a Washer (HE) and
through the five Large Red Tubes (A-1) in the order
shown. Secure with a Washer (HE) and Standard Nut
(HD). Tighten completely.
4
5
2
1
3
4
5
2
1
3
When moving the Dome Climber, do not slide the Dome or tip it on its side.
This may cause the Dome to lose its shape. Instead, use several people to lift the Dome and
move it to the new location.
Before allowing children play ensure handholds are in place and secure. Replace broken
handholds immediately, do not allow children to play on damaged equipment.
HE
Attach Handholds (C) to each of the joints not touching the ground.
Attach the handholds by sliding a Washer (HE) over the 1 3/4” Bolt
(HA) and placing the Handhold (C) over the 1 3/4” Bolt (HA). Line
up the notch on the bottom of the handhold with the tube on the
top of the joint.
Secure each Handhold with a Washer (HE) and Nylock Nut (HC).
Tighten completely.
HA
STOP: It is critical that
this washer is added.
A-1
A-1
A-1
A-1
Make sure the notch in the handhold
is securely in place over the tube, as
shown.
Check and tighten all bolts before allowing children to play. Do not allow
Children to play on the Dome Climber before the handholds are in place.