Instructions / Assembly
INSTALLATION INSTRUCTIONS
For additional information involving LifeTiles, please contact lifetiles@engineeredoors.com
6
5) INSTALL LIFETILES
®
LifeTiles
®
require a quarter turn installation method. See diagram below for sample of quar-
ter turn. Note that there are helpful arrows on the back of each tile that will show the direc-
tion of how the tile should be laid.
Start with your initial square, ensuring the lines follow the diagram above. The next group
of tiles will be laid in a square surrounding the initial square. Always nestle a tile snuggly
against the corner created by the neighboring tiles. Ensure there are no gaps when you
place tiles next to each other. Press down rmly and smooth out the tile.
6) TRIMMING
Trimming is often necessary for LifeTiles
®
that align with the wall. Measure the space be-
tween one of the tiles and the wall at the two corners of the tile nearest the wall. Draw a
matching layout line on the back of a new tile. Before cutting, ensure arrows are facing the
correct direction. Cut along the line with a utility knife using a straightedge for assistance.
Tip: Cut tiles on top of a cardboard box or concrete.
Do not cut on top of another tile to prevent damage to the tile underneath.