Installation Guide

Bed Assembly Instructions
Page 2 of 2
SOHO BED
Side rail
Slat
4nos M6 x 70mm bolt
fastened to 4 nos
pre-drilled slats
2nos M6 x 40mm Bolt
Leg Frame
Leg Frame
Slat Support
Step 1/Diagram 1
Fix both side rails to the Head Board and Foot Board as shown in
diagram 1 with the 20mm bolts and washers.
Step 3/Diagram 3
Spread out all the slats on to the slat support and
fasten it down with 2nos M6 x 40mm bolts at the
second hole at both ends with pre-inserted nut
facing down as shown in the diagram 3.
Step 2/Diagram 2
Further secure the pre-drilled slats to the
slats support and support legs with 4nos
M6 x 70mm bolt as shown in diagram 2.
Step 4/Diagram 4
Finally, place both ends of the
assembled slats in the bed frame
resting on both sides of the
side rails and screw them in
place with the 32mm screws
provided as shown in diagram 4.
Diagram 1
Diagram 2
Center Slat
Support
Leg Support
M6x70mm
Bolts
Leveler
Pre-drilled
Slat
M4 Allen
key
Washer
Metal Bracket
Threaded Hole
Side Rail
5mm Allen Key
M8 x 20mm
Bolt
The Fusion Of Function And Comfort With Style
Pre-inserted nut
Facing down
40mm bolts
Slat
Slat Support
Diagram 3
fasten screws to all slats
on side rail
Diagram 4
Screw
Model shown for assembly illustrations only