Instructions / Assembly

WESTIN WITH CURVE ARM CHAIR

Rev.040215

4 of 4

Finally, stretch and pull down rear cover evenly before securing velcro strip

to seat base. Repeat if necessary for better fit.

TOLL FREE 877-693-8866 LIFESTYLE SOLUTIONS

Insert backrest metal plates to both arms as shown below.

Ensuring it is correctly in place.

PAGE 1
Insert backrest metal plates to both arms as shown below. Ensuring it is correctly in place. Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit. WESTIN WITH CURVE ARM 4 of 4 Rev.
PAGE 2
PARTS AND HARDWARE ASSEMBLY INSTRUCTIONS Avoid using sharp objects such as a knife to open packing as you may accidentally damage the upholstery. CAUTION: At least two adults are required to safely complete performing this task. Other lifting attempts may risk back injury due to large and heavy part(s). Carefully unpack parts/hardware from storage of seat body and place on a clean flat surface. Leg 4x M10 Washer (Outer Dim.