HARTFORD WITH CURVE ARM 8 of 8 Rev.
PARTS AND HARDWARE Avoid using sharp objects such as a knife to open packing as you may accidentally damage the upholstery. M10 Washer (Outer Dim.
ASSEMBLY INSTRUCTIONS CAUTION: At least two adults are required to safely complete performing this task. Other lifting attempts may risk back injury due to large and heavy part(s). Carefully unpack parts/hardware from storage of seat body and place on a clean flat surface. Storage Place both arms as shown below, secure two legs and plastic washers into pre-drilled holes on the bottom of arms. Please avoid overtightening.
Carefully lift and turn assembled arms onto its legs. Insert seat body metal plates to both arms as shown below. Ensure it is correctly in place. Insert backrest with ear piece metal plates to both arms as shown below. Ensuring it is correctly in place. Insert both backrest ear piece metal plates to both sides of backrest. Ensure it is correctly in place. Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necessary for better fit.
