Instructions / Assembly

14
MANUAL START UP
In case of igniter failure, you can start your grill manually.
1. Remove the grate, drip pan and flame deflector.
2. Clean out fire pot and place no more than 1/2 cup of pellets in the bottom. Add a small
amount of solid fuel fire starter, such as those made from sawdust and wax wood
shavings. (A paper towel, shredded cardboard, or shredded newspaper can work as
a substitute.)
Note: If you have a torch lighter, a fire starter is not needed.
3. Light the fire starter.
4. After the pellets are burning briskly, turn on your grill. If your fire goes out, repeat
steps 1-4.
5. If your fire stays lit, replace the stainless flame deflector, drip pan and cooking grate
and close the lid. Be careful not to touch the fire.
CAUTION: DO NOT USE FLAMMABLE LIQUIDS SUCH AS GASOLINE, GASOLINE-TYPE
LANTERN FUEL, KEROSENE, CHAR- COAL LIGHTER FLUID, OR SIMILAR LIQUIDS TO
START OR FRESHEN-UP THE FIRE! KEEP ALL SUCH LIQUIDS WELL AWAY FROM THE
GRILL WHILE IT IS IN USE.