Use and Care Manual

www.culer.com | 1-800-320-6478Rev. 11.17.15 7
• Replace cap and turn until
sealed.
• The cooler is conditioned and
ready for operation.
NOTE: Each cooler has two lters:
one for water
and one for air
• Locate the lter access doors
on the sides of the cooler.
• Place small athead
screwdriver into slot on access
door near back of unit and
gently move the screwdriver
towards back of unit until door
can be removed.
• The lters are connected to the
tubing at the blue ttings.
REPLACING FILTERS