INFRARED QUARTZ TOWER HEATER / FAN lifelux® is a registered trademark of Source Network Sales & Marketing Inc., All Rights Reserved. MODEL #LS19-CIQH-M / MW ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number (located on back of unit) __________________ Questions, problems, missing parts? Contact technical support department at 1-866-484-2066, 8:00 a.m. - 5 p.m., CST, Monday - Friday or www.@lifecorpproducts.
TABLE OF CONTENTS Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Frequently Asked Questions . . . . . . . . . . . . . . . . . . . .
PACKAGE CONTENTS A C D B Front View PART Rear View DESCRIPTION QUANTITY A Infrared Heater 1 B Remote Control 1 C Control Panel (pre assembled to Infrared Heater (A)) 1 D Temperature Sensor (pre assembled to Infrared Heater (A)) 1 3
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product. IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • This heater must be plugged into a 120 V, 15 amp (or more) circuit of its own.
SAFETY INFORMATION Child Lock Safety Feature Press the Child Lock button located on the control panel for 5 seconds. Locking is confirmed when a buzzer rings and the control panel displays “CL”. When locked, the control panel and remote control will not function. To unlock the control panel and remote, repeat this procedure. Unlocking is confirmed when a buzzer rings and the lock indication disappears. Tip-Over Safety Feature This heater is equipped with a tip-over safety feature.
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater. Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. Why is this happening? A. This is normal. This heater is treated with a special heat safe/resistant coating. This odor will sometimes be present when the box is opened.
FREQUENTLY ASKED QUESTIONS Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal. The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat). This is because the temperature sensor on the heater reads the temperature directly around the heater.
PREPERATION Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet. Only operate heater in upright position. Insert two AAA batteries into the remote control before using (batteries not included). Please note that infrared heaters do not heat like a traditional space heater. You should not expect infrared heaters to blow hot air like a traditional space heater. Infrared heaters heat objects not air.
CONTROL PANEL 1 2 3 4 17 16 5 15 14 13 12 11 10 9 8 7 6 PART NAME DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Timer Indicator Light Digital Display Celsius Indicator Light Fahrenheit Indicator Light Power Indicator Light Safety Lock Button Timer Button Oscillation Button Fan Speed Button Temp-Down Button Temp-Up Button C/F Button Heater Mode Button Power Switch Button Energy Saving Indicator High Heat indicator Low Heat Indicator Indicates when the timer function is active Read
REMOTE CONTROL 1 6 2 7 8 3 4 5 9 PART 1 2 3 4 5 6 7 8 9 NAME Digital Display Power Button Heat Button Fan Speed Button Timer Power Button Temp Down Button Temp Up Button Oscillation Button °C/°F Button DESCRIPTION Displays last set heater temperature and heat modes Powers the heater on or off Toggles between the three available modes (High / Low / Eco) Toggles between High and Low fan speeds Engages the on/off timer function Decreases the set temperature Increases the set temperature Engages osci
OPERATING INSTRUCTIONS 1. Turn the heater on or off by pressing the POWER button on the control panel (C) or by pressing the POWER button on the remote control (B). 1 Once the power is off, heating elements will stop working first. The fan will continue working for up to 3 minutes to dispense residual heat inside the heater. This is a normal function. 2. Select a heat setting by pressing the HEAT button on either the control panel (C) or the remote control (B) to toggle between the three heat settings.
OPERATING INSTRUCTIONS 4. To set the timer power off, start the unit and press the Timer button on the control panel (C) or remote control (B). 4 B C Note: The timer-power-off function can only be set when the heater is in power-on mode. The digital display on the control panel (C) changes from the set temperature readout to a time value for the timer. Press the Timer button repeatedly to change the number value between a range of 0 to 12 hours (in 1-hour intervals).
6. To engage the fan only mode, with the unit power on press the Fan Speed button on the control panel (C) or remote control (B). 6 The digital display on the control panel (C) changes from the set mode readout to an illuminated “L” icon. C Switch from low or high fan speed settings by pressing the Fan button on the control panel (C) or remote control (B). B L C 7.
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, unplug the unit, and allow it to cool completely. 1. To keep the heater clean, clean the outer shell with a soft, damp cloth. Use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 2. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 3.
LIMITED WARRANTY The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference. This product is made with the highest quality materials and is warranted to be free from defects in materials and workmanship at the time of purchase.
REPLACEMENT PARTS LIST For replacement parts, call our technical support department at 1-866-484-2066, 8 a.m. - 5 p.m., CST, Monday - Friday or Warranty@lifecorpproducts.
