INFRARED QUARTZ HEATER MODEL #LS-IQH-DMICRO lifepro® is a registered trademark of lifecorp products®, All Rights Reserved. ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number (located on back of unit) __________________ Questions, problems, missing parts? Contact technical support department at 1-866-484-2066, 8:00 a.m. - 5 p.m., CST, Monday - Friday or www.@lifecorpproducts.
TABLE OF CONTENTS Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . .
PACKAGE CONTENTS A C D B Front View PART A B C D Rear View DESCRIPTION Infrared Heater Master Power Switch (pre assembled to Infrared Heater (A)) Control Panel (pre assembled to Infrared Heater (A)) 3-Prong Direction Adjustment Switch (pre assembled to Infrared Heater (A)) 3 QUANTITY 1 1 1 1
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product. IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • This heater must be plugged into a 120 V, 15 amp (or more) circuit of its own.
SAFETY INFORMATION Overheat Safety Feature This heater is equipped with an overheat safety feature. When the internal components of the heater reach a certain temperature that could cause overheating or possible fire, the heater will automatically shut off. WARNING: This heater has a voltage rating of 120 volts. The cord has a threeblade, grounding-type plug. An adapter is available for connecting three-blade grounding-type plugs to two-slot receptacles.
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater. Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. Why is this happening? A. This is normal. This heater is treated with a special heat safe/resistant coating. This odor will sometimes be present when the box is opened.
Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal. The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat). This is because the temperature sensor on the heater reads the temperature directly around the heater.
PREPARATION Plug the heater into a grounded 120 V, 60 Hz power outlet. Only operate heater in upright position. Please note that infrared heaters do not heat like a traditional space heater. You should not expect infrared heaters to blow hot air like a traditional space heater. Infrared heaters heat objects not air. Infrared heaters are intended to supplement an already heated, insulated room. Square footage specifications assume a single enclosed room not an entire home.
CONTROL PANEL 1 \ PART 1 2 3 4 5 NAME Digital Display Temp-Down Button Temp-Up Button Timer Button Speed Button 2 3 4 5 DESCRIPTION Readout of the set room temperature or timer value Decreases the set temperature Increases the set temperature Engages the off timer function Toggles between the two modes available 9
OPERATING INSTRUCTIONS 1. Turn the heater on or off by pressing the Master Power Switch located on the side of the unit (B) to the I position. 1 Once the power is off, the heating elements and fan will stop working. This is a normal function. 2. Select a fan speed setting by pushing the Speed Button on the control panel (C) to toggle between the two fan speed settings high and low. C 2 C 3. Set the thermostat by pressing the arrows on the control panel (C).
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, unplug the unit, and allow it to cool completely. 1. To keep the heater clean, clean the outer shell with a soft, damp cloth. Use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 2. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 3.
ONE-YEAR LIMITED WARRANTY The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference. This product is made with the highest quality materials and is warranted to be free from defects in materials and workmanship at the time of purchase.
REPLACEMENT PARTS LIST For replacement parts, call our technical support department at 1-866-484-2066, 8 a.m. - 5 p.m., CST, Monday - Friday PART A B C D E F DESCRIPTION Control Panel Fan Power Board PTC Heating Block Thermostat Power Switch PART # RH121539 RH121525 RH121545 RH121544 RH121546 RH121526 A B C D E F PLEASE REMEMBER TO REGISTER YOUR WARRANTY: Registration@lifecorpproducts.com Printed in China lifepro is a registered trademark of lifecorp products®, All Rights Reserved.
