INFRARED QUARTZ HEATER MODEL #LS-3W-BPIQT ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number (located on back of unit) __________________ Questions, problems, missing parts? Contact technical support department at 1-866-484-2066, 8 a.m. - 5 p.m., CST, Monday - Friday or Warranty@lifesmartproducts.com Please have your model and serial number ready.
TABLE OF CONTENTS Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Frequently Asked Questions . . . . . . . . . . . . . . . . . . . .
PACKAGE CONTENTS A F C D E Front View Rear View B PART DESCRIPTION QUANTITY A B C D Infrared Heater Remote Control Control Panel (preassembled to Infrared Heater (A)) Filter Cover (preassembled to Infrared Heater (A)) Temperature Sensor (preassembled to Infrared Heater (A)) Master Power Switch (preassembled to Infrared Heater (A)) 1 1 1 1 E F 3 1 1
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product. IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: • This heater must be plugged into a 120 V, 15 amp (or more) circuit of its own.
SAFETY INFORMATION Child Lock Safety Feature Press the Temp Up and Temp Down buttons located on the control panel together for 3 seconds. Locking is confirmed when a buzzer rings. When locked, the control panel and remote control will not function. And To unlock the control panel and remote, repeat this procedure. Unlocking is confirmed when a buzzer rings and the lock indication disappears. Tip-Over Safety Feature This heater is equipped with a tip-over safety feature.
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater. Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. Why is this happening? A. This is normal. This heater is treated with a special heat safe/resistant coating. This odor will sometimes be present when the box is opened.
FREQUENTLY ASKED QUESTIONS Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal. The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat). This is because the temperature sensor on the heater reads the temperature directly around the heater.
FREQUENTLY ASKED QUESTIONS Q. My heater’s power cord gets warm. My cord is showing signs of heat or melting at the outlet. Is this normal? A. A warm power cord is normal. These power cords are rated safe for up to 105°C/ 221°F by the UL, CSA, or ETL. The exception is, if you detect heat, smoke, or signs of melting at the contact point of the wall outlet, it may be due to loose or worn wall contacts (or arcing).
CONTROL PANEL 1 15 14 13 C High Timer Low F Eco 12 TIMER C/ F 11 10 9 8 2 Power 3 4 5 MODE ON/OFF 7 6 PART NAME DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Digital Display High Heat indicator Low Heat Indicator Power Indicator Light Energy Saving Indicator Power Switch Button Mode Button Temp-Up Button Temp-Down Button °C/°F Button Timer button Fahrenheit Indicator Light Signal-Receiving Window Timer Indicator Light Celsius Indicator Light Readout of the set room temperature or
REMOTE CONTROL 1 2 3 4 6 5 PART 1 2 3 4 5 6 NAME ON/OFF Button Temp Up Button Temp Down Button Mode Button Timer Power Button °C/°F Button DESCRIPTION Powers the heater on or off Increases your set temperature Decreases the set temperature Toggles between the three modes available Engages the on/off timer function Alternates between Celsius and Fahrenheit readout 10
OPERATING INSTRUCTIONS 1. Turn the heater on or off by pressing the Power button on the control panel (C) or by pressing the ON/OFF button on the remote control (B). 1 Once the power is off, heating elements will stop working first. The fan will continue working for up to 3 minutes to dispense residual heat inside the heater. This is a normal function. 2.
OPERATING INSTRUCTIONS 4. To set the timer power off, start the unit and press the Timer button on the control panel (C) or remote control (B). 4 TIMER Note: The timer-power-off function can only be set when the heater is in power-on mode. B C The digital display on the control panel (C) changes from the set temperature readout to a time value for the timer. Press the Timer button repeatedly to change the number value between a range of 0 to 12 hours (in 1-hour intervals).
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, turn off the power switch in the rear of the unit, unplug the unit, and allow it to cool completely. 1. To keep the heater clean, clean the outer shell with a soft, damp cloth. Use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 2. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION The heater does not turn on. 1. The power cord is not plugged in. 1. Plug the power cord into an electrical outlet. 2. The electricity at the main fuse box is not working. 2. Check the electricity at the main fuse box. 3. The battery in the remote control is dead. 4. Increase the thermostat temperature on the heater for a higher heat setting. 4. The thermostat on the heater is set lower than the room temperature. 3.
REPLACEMENT PARTS LIST For replacement parts, call our technical support department at 1-866-484-2066, 8 a.m. - 5 p.m., CST, Monday - Friday or Warranty@lifesmartproducts.
