Instructions / Assembly
Start massage
1. Connecting the power,turn on main power switch
II
...._____
_
______;,___
_____
_______,
• In the Auto Mode
You may change from one massage program to another
at
any time
without having to wait for
it
to complete. The twinkled button is the
current massage mode
• In the Manual Mode
You may change from one massage program to aonther
at
any time
without having to wait for
it
to complete.
After use
Rise the chair up and lower the footrest completely.
Press ON/OFF key to turn off the chair, wait until chair gets back to its initial status.
After airbags deflate
completely, rollers get back to its initial position,sole massage stops,
heating stops, then step out
of
the legrest.Do not stand in the legrest.Turn off main power
switch,unplug power plug.
,A
CAUTION
After you use the chair, turn off the main power switch, and unplug the
power
plug from the socket.
-+Otherwise, accident
or
injuries may be caused by children
or
pets.
After you use the chair, be sure to raise back
completely and lower
the footrest completely.
After you use the chair, please clean it and place it in dry places.
When unplugging the power cord, please do not pull it directly;
instead, you should unplug it pinching the power plug.
Please
be sure to put the power cord away in prevention
of
tripping
over.
Troubleshooting
If
there
is still a problem after trying
the
solutions given
in
this troubleshooting guide,
stop
using
the
chair
immediately
to
prevent accident
or
injury, and unplug
the
power
plug from the wall outlet. Contact the vendor
or
your near
est
service center
for
assistance.
Problem
Causes and troubleshooting
The massage chair
can not opoerate
eventhoughithas
~
been connected to
,.
the power supply.
•
Check whether the plug is well connected and
working
well
•
Check whether the main switch on the
massage chair is turned to position "I"
During operation,
the controller is
working, but the
chair can not work
During operation,
both the controller
and the massage
can not work
Safety check
~
• The massage chair could be overheated after
prolonged use.
It
will automatically cool down
to
resume its normal condition.
• Please turn off the power and allow the chair
to
cool down for 30
or
50 minutes
• If the set-time
in
the Timer
is
complete, please
~
press the timer function again to resume
,.
operation
• Switch OFF the power and switch ON again to
restart the chair
Regular Maintenance Will Preserve the Life
of
You
r Chair
Have you experienced
any
of
these problems?
•
The
chair
does
not start with the Main
POWER
switch
se
t to ON
...=:
·
=---,--,...--...,..,....,..--,-.,.......,.-,
•
The
power cord
has
been cracked
or
scratched.
If
you find anything listed
•
The
power cord
or
plug becomes abnormally hot. on the left, stop using and
. . .
unplug the power cord from
•
The
chair produces a burnt smell, abnormal sound
or
v1bra
t
1on.
the
outlet to pre
vent
fail
ure
e
The
auto timer function does not
wor
k
in
some
cases.
or
an
acc
ident.
Be
sure
to
e
Other
failur
es
contact the
ve
ndor
or
our
.
servb:l
a:rterfa'
rrEi'1tenarlre
To
use
safely
The
chair fabric (ro
ll
er
fabric) is a consumable part, and its
serv
ice life is 3 years
(conditions
of
use:
two
15-minute
sessions a day, every day).
For
safe use, periodic inspection
by
the vendor is recommended before the end of its
service
life.
*Durable
years
vary
depending
on
conditions of use.
*After
about five years
of
use, a professional inspection is recommended even
if
there
are
no
symptoms
or
problems.
For
inspection fees, contact t
he
vendor.