Instructions / Assembly
Before use
• When the temperature is too low
to
run the machine, please increase the ambient
temperature gradually,
do
not increase the temperature
in
sudden. Please move
the
chair
to
the warm place and keep on waiting
for
1
hour
before starting.Or it will result
in
moisture
of
parts and abnormal operation.
~Or
it will result in moisture
of
parts and abnormal operation.
How to
assemble the shoulder
• Unzipping the shoulder device, put
the
iron part into the slots on
the
end
of
the shaft, let
the
hole "A" match with the slots "B"
•
Connect the
air
hose "E"
to
the
air
hose "F" exposed on
the
backrest.
• Use
the
screw (M6 X 16)
to
fix on the shaft
of
the backrest.
• Zip the cover
• Repeat above steps to assembly the other shoulder.
How to assemble backrest pad and seat cushion
• Connect the wire
of
the heater plug from the backrest to underneath
of
the
seat (Fig 1)
• Connect the backrest and the seat by zipper. (Fig 2)
• Attached backrest pad with zipper. (Fig 3)
• Attached the pillow pad using the velcro fasten (fig 4)
Heater
(Fig 3) (Fig
4)
(Fig 2)
Where to place
the
chair
Please
make sure
that
the
massage chair
has
about 19.685in in
front
of
it,
leaving about 19.685in behind
the
chair
to
allow free reclining
of
the
backrest.
r
CAUTION
e Please do not use
in
a humid place such as sauna or bathroom.
e Place
on
a levels surface before use.
e Please do not use
in
the following situations:
in
a utility room or dusty place or
in high temperatures (over 40°C).
e
Do
not place it
in
the sun
or
near heating appliances.
e Please
keep
cigarettes, ashtrays or flammable goods
away
from
the massage chair
:.1
e
To
prevent damage to the floor and reduce noise, please
lay
carpet under the massage
chair (do
not
use
an
electric blanket).
e Please be careful placing this machines, as
it
is heavy.
e
To
avoid excessive noise, make sure the massage chair is a minimum
of
1 meter away
from the
TV,
radio, and other AV machine.
19.685
in
t
~-
- \\
--
~
--
~,
---
·- .
~,
~
- ~
\\ :
19.685 in
\\>\
_
:\
-'·
)__-
e Please ensure there is a chair and accessories inside
the
packing box
~-----------------------------------------------------------~
' chair
1
Accessories '
[
I
I
:~I
I I
Manual book
Warranty card
I I
1
Accessories bag
for
installation
I
I I 1
, chair Controller Manual book Power cord 1
' ,
-----------------------------------------------------------~