MULTI-FUNCTION MASSAGE CHAIR WITH LIFT, HEAT & USB MODEL # BT-L8796A51 Questions, problems, missing parts? Contact technical support department at 657-341-0362, 9:00 a.m. - 5 p.m., PST, Monday - Friday or email us at cs@scsources.
i IMPORTANT SAFETY INFORMATION • When using an electrical appliance, basic precautions should always be followed. Always unplug the lift chair from the power source after use, and before cleaning. Do not reach for lift chair if large amounts of liquid have spilled on it. Unplug immediately. The chair should never be left unattended when plugged in. Unplug from the outlet when not in use, before putting on or taking off parts or attachments. Do not use outdoors.
HEALTH PRECAUTIONS • • • • If you have any concerns regarding to your health, consult your doctor before using this product. Individuals with pacemakers should not use this product. If you have pain in a muscle or joint after using for a prolonged period of time. Discontinue using and consult your doctor. Persist pain could be a symptom of a more serious condition. MAINTENANCE STORAGE INSTRUCTIONS: Place unit in its box or safety dry and cool place.
FREQUENTLY ASKED QUESTIONS Q. I can’t find the power cord and remote control. Where is it located?A. The chair’s accessories are packed together and attached to the arm rest bracket. Q. My chair does not recline/lift. Why? A. On the remote control you must PUSH and HOLD the UP or DOWN button. Q. Can the heating feature be used independently? A. No, the heating function can only be used with the massage mode. Q. I have a medical device, such as a pacemaker, can I use this chair? A.
ASSEMBLY INSTRUCTIONS GENERAL INFORMATION, TIPS & TRICKS 1. 2. Please read this instruction prior to assembling this product. To avoid damage, assemble this product on a non-abrasive surface such as carpet. This product is intended for residential use only. Commercial applications are not permitted. Please make sure you have all parts before assembly, located underneath the chair seat bottom. 3. 4. PARTS LIST A B D E A. B. C. D. E. F.
Step 1 Locate the transformer (F) & wire plug (E) and remote control (D) secured to the hinge bracket of the seat. Step 2 Attach backrest (B) to main frame (A) by aligning the metal grooves on backrest to brackets on the main frame as shown. Ensure the backrest (B) slides down fully over the brackets on the main.
Step 3 A. Connect the three wires attached to backrest (B) with wire plugs attached to the seat (A) according to the corresponding plug type and color as shown below. B. Connect the transformer (F) control to power cord (E) and then wall outlet. E F Step 4 Attach the chair bolsters (C) to the back sides (B) by aligning the metal grooves on each side. place.
REMOTE CONTROL 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1. Massage Timer Indicator Light 2. Massage Mode Indicator Light 3. Intensity Indicator Light 4. Heat ON/OFF Indicator Light 5. HEAT ON/OFF Button 6. Power ON/OFF Button 7. Massage Point Area Button PAGE 8 8. Massage MODE Button 9. Massage TIMER Button 10. Intensity Select Button 11. Backrest RECLINE Button 12. Backrest UP Button 13. RECLINE Button 14.
OPERATING INSTRUCTIONS • Press POWER to start the massage. Click to button massage modes 1through 6 .The unit will power off in 15 minutes unless changed. The unit's default intensity is set to 2 unless changed. • Press POWER to POWER OFF the unit. • Press HEAT button to ENABLE OR DISABLE heating function. • Press POINT button to cycle between massage areas such as back, thighs, legs or buttocks. The # indicator light will illuminate on the remote control.
WARNING INFORMATION • • • • • • • • • • • • To prevent the chair from tipping over, gently sit down on the chair and avoid throwing yourself onto it. Move the chair into the reclining position slowly, making sure that no children or pets are in close proximity. Do not allow children to play on or around the chair, particularly when it is in the reclined position. Close the recliner completely before standing. Never sit on the footrest when it is extended.
1 YEAR LIMITED WARRANTY The manufacturer warrants this unit against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference. This warranty is subject to personal use only, commercial or rental applications will not be covered.
PAGE 12
