Installation Guide

12
2
1
Jointing and Securing the Trims
Take one Horizontal Trim (E) and one Longitudinal Trim (F), joint and align the 3 holes on the edges.
Operation
Metal Frame Setup Instructions
Secure other trims to be a finished Frame
Repeat the upper steps to secure all 12 bolts and nuts.
The Wall Fire provided 2 Frames options, it can be Frame option either front glass or Metal Frame,
the Metal Frame is covering the front glass when it was fixed.
Insert Inner hexagonal bolt (DD) to go through the aligned holes, secure the Outer hexagonal nut (EE) on the bolt
by using provided Tool (FF).
Repeat step 2 to secure other 2 nuts.
E
F
FF
EE
DD
The Assembled Metal Frame is as below.