Installation Guide

12
OPERATING INSTRUCTIONS
1. Turn the heater on or off by pressing the Pow-
er button on the control panel (C) or by press-
ing the Power button on the remote control
(B).
Once the power is off, heating elements
will stop working first. The fan will continue
working for up to 90 seconds to dispense
residual heat inside the heater. This is a
normal function.
1
C B
2. Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the two
heat settings.
Power for high is 1,500 W; low is 1,000 W.
2
C B
HIGH LOW
3. Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B).
You can set the temperature on the heater
anywhere between 50°F and 90°F. Once
you have chosen the desired temperature,
the heater will remain on until the room
temperature increases to the temperature
on the digital display. The heater will cycle
on and off to maintain the desired room
temperature.
Note: To engage the child lock press the child
lock button on the control panel (C). On
the remote (B), long press the child lock
button for 3 seconds to engage the child
lock.
3
C
B
C
B