Instructions / Assembly

OPERATING INSTRUCTIONS

• Press KEY 5( POWER) to start the massage. Click to button massage

modes 1 through 6 .The unit will power oﬀ in 15 minutes unless

changed.the unit's default intensity is set to 2 unless changed.

• Press KEY 5 POWER to POWER OFF the unit.

• Press KEY 6 (HEAT) button to ENABLE OR DISABLE heating function.

• Press KEY 7(MODE) modes adjustment button , auto, gentle, wave,

squeeze, tap, knock, click on the button.

• Press KEY 8(POINT) button to cycle between massage areas such as

back, thighs, legs or buttocks. The indicator light will illuminate on

the remote control.

• Press KEY 9( INTENSITY) button on the remote control to cycle the

massage intensity. The indicator strength on the remote control

lllllll will increase from 1 to 3 in one level increments

• Press KEY 10(TIMER) to set the power oﬀ timer up to 30 minutes in 5

minute increments. Default operation time is 15 min.

• Press and KEY 11(HOLD UP )or KEY 12(HOLD DOWN) to recline or

lift the chair.

HOLD DOWN BUTTON

TO RECLINE

HOLD UP BUTTON

TO LIFT

PAGE 9