Use and Care Manual

OPERATING INSTRUCTIONS
• Press Power Button to start the massage. The unit will automatically
cycle from massage modes 1. The unit will power o in 10 minutes
unless changed. The unit’s default intensity is set to LOW unless
changed.
• Press Power Button to POWER OFF the unit.
• Press INTENSITY button on the remote control to cycle the massage
intensity. The indicator light strength on the remote control will
increase from LOW to HIGH.
• Press TIMER to set the power o timer up to 60 minutes in 5 minute
increments. Default operation time is 15 min.
• Press or MODE DOWN to cycle from the 10 available
vibration / massage modes.
• Press M button to cycle between the 3 available massage modes. The #
indicator light will illuminate on the remote control.
• Press HEAT button to ENABLE OR DISABLE heating function.
• Press and HOLD LIFT or HOLD RECLINE to lift up or down the chair.
• Press and RECLINE OPEN or RECLINE CLOSE to adjust reclining up or
down the chair.
PAGE 9