Use and Care Manual

Step 2
2A. Connect the corresponding (F) wires on the back of the chair
backrest (B) to chair bottom (A)
2B. Attach backrest (B) to main frame (A) by aligning the metal grooves on
backrest to brackets on the main frame as shown.
Ensure the backrest (B) slides down fully over the brackets on the main
frame (A) and rmly press down to secure in place.
Step 1
Place the Seat (A) on its back on a at smooth surface. Locate the chair’s
transformer (C) & wire plug (D) and remote control (E) from the bottom of
the seat.
PAGE 6