User's Manual
BHS-i100 Installation and Programming Instructions
27
2-4: No
13. Medical Alarm Yes/No 1: Yes
2-4: No
14. Auxiliary Alarm Yes/No 1: Yes
2-4: No
15. Silent Alarm Yes/No 1: Yes
2-4: No
16. Burglary
Trouble
Yes/No No
17. Fire Trouble Yes/No 1: Yes
2-4: No
18. Gas Trouble Yes/No No
19. Panic Trouble Yes/No No
20. Medical Trouble Yes/No No
21. Auxiliary
Trouble
Yes/No No
22. Silent Trouble Yes/No No
23. Closing Yes/No No
24. Opening Yes/No Yes
25. Cancel Yes/No Yes
26. Receiver
Jammed
Yes/No Yes
27. Device Error Yes/No Yes
28. Device Tamper Yes/No No
29. AC Fail Yes/No No
30. Low Battery Yes/No Yes
31. Battery Fail
(Load Shed)
Yes/No Yes
32. Siren Trouble Yes/No Yes
33. Comm Test Yes/No Yes
34. Close
Delinquent
Yes/No Yes
35. Exit Error Yes/No Brinks: No
SIA: Yes
36. Recent Closing Yes/No Brinks: No
SIA: Yes
37. Installer Action Yes/No Yes
Advanced Menu Option 3: Global Parameters. The third item
in the Advanced Menu is View/Edit Global Parameters. This
item includes the topics listed in the table below.
Topic Range Default
1. Account Menu
1. Account ID 0-8 characters Blank
2. Account Name 0-20 characters Unnamed
3. Account Mode Normal
Local System
Local Fire
Normal
4. User Code
Length
3-8 digits * 3
5. Wrap Around
Enable
Yes/No Yes
6. Quick Arm
Enable
Yes/No Yes
7. Alarm Cancel
Enable
Yes/No Yes
8. Confirm FOB
Bell
Yes/No No
9. FOB is Medical Yes/No No
10. Installer Name 0-24 characters Installer
2. Telephone Line Menu
1. Dial Prefix 0-8 characters Blank
2. Long Dist.
Access Code
0-16 characters Blank
3. Line Access Tone/Pulse Tone
4. Answering Yes/No Yes
Machine Bypass
Enable
5. Voice Mail
Defeat Enable
Yes/No Yes
6. Answer by CID
Enable
Yes/No Yes
7. Update Time
From CID Enable
Yes/No Yes
8. Ring Count 0-15 15
9. Comm Enable Yes/No Yes
10. Line Cut
Monitor Enable
Yes/No No
11. Host Phone
Number
0-10 characters Blank
12. Host Check-in
Weeks
0-52 13
13. Call Service
Provider
Yes/No No
3. System Menu
1. Display Time Yes/No Yes
2. Daylight Savings
Time Enable
Yes/No Yes
3. Low Battery
Report
Yes/No No
4. Power Fail
Delay
0-255 minutes 5
5. Comm 2 Backup Yes/No No
6. Latching Chime Yes/No Yes
7. Double Dispatch Yes/No No
8. Delay Display
Enable
Yes/No Yes
9. Delinquent Days 0-255 days 30
10. Test Report
Enable
Yes/No Yes
11. Test Time-
Minutes
0-59 minutes 0
12. Test Time-
Hours
0-23 hours 20
13. Test Interval-
Hours
0-10,000 hours 4,368 (6 months)
14. Defer Test Yes/No Yes
15. Dialer Delay
Time
0-255 seconds 20
16. Ring Back
(arming
configuration)
Yes/No No
17. Run Away
Thrshld
0-15 digits 5
18. Restore
Minutes
0-250 minutes 5
19. Expiration Date MM/DD/YYYY 09/09/9999
20. Exit Restart
(SIA Only)
Yes/No Yes
21. Auto Motion Off
(SIA Only)
Yes/No Yes
22. Reset
Swingers
(SIA Only)
Yes/No No
23. Swinger Trips
(SIA Only)
1
24. Cross Zone
Time (SIA Only)
Seconds 20
4. Alarm Sounds
1. Fire Pattern Select from List
B (page 29)
Temp Code 3 USA
2. Fire Cutoff
Minutes
0-255 minutes 0 (latching)
3. Burglary Pattern Select from List Steady