User's Manual

BHS-i100 Installation and Programming Instructions
26
Advanced Menu topics. The tables that follow list the
programmable topics found in Advanced Programming, and
show the ways in which each topic can be configured. Rows
shaded grey are menu items, rather than programmable topics.
Below each grey row are one or more indented rows showing
the programmable topics found under that menu item.
Advanced Menu Option 1: Device Menu.
The second item in the Advanced Menu is the Device Menu.
From this menu, you can change the programming of the
system or any device. The numbers reflect the order in which
the devices were learned. The items in the Device Menu will
also vary, depending upon which device you are editing.
Topic Range Default
1. Grid Extender Menu
Select Grid Extender
1. View/Edit Grid Extender
1. Name 0-20
characters
Keypad Or
Signal
Extender
2. Gateway Status Read Only
3.Mastership Status Read Only
4. Chime Enable Yes/No Yes
5. Exit Tone Enable Yes/No No
6. Entry Tone Enable Yes/No Yes
7. Exit Delay Time 1-255 seconds 80 (Brinks)
60 (SIA)
8. Siren Enable Yes/No Yes
9. Backlight Latch Yes/No Yes
2. Replace Grid Extender
3. Delete Grid Extender
4. GC # -> Not Master
2. Zone/Sensor Menu
Select Zone/Sensor
1. View/Edit Zone
1. Enabled Yes/No Yes for all
except Line
Cut and
Duress
zones.
2. Zone Type Select from
List A (page
29)
3. Zone Name 0-20
characters
4. User Bypass Enable Yes/No Yes
5. Motion Bypass Enable Yes/No No
6. Special Bypass Enable Yes/No No
7. Chime Zone Enable Yes/No Yes
8. Entry Delay Time 0-255 seconds 40
9. Restore Report Enable Yes/No No
10. Trouble Report
Enable
Yes/No No
11. Dialer Delay Enable Yes/No Yes
12. Report Comm 1 Yes/No Yes
13. Report Comm 2 Yes/No Yes
14. Report Comm 3 Yes/No Yes
15. Report Comm 4 Yes/No Yes
16. Swinger Bypass
Enable (SIA only)
Yes/No Yes
17. Cross Zone Enable
(SIA only)
Yes/No No
18. Fire Verify (SIA Only) Yes/No No
2. Replace Zone/
3. Delete Zone
Topic Range Default
3. Keychain Remote Menu
Select Keychain Remote
1. View/Edit Keychain Remote
1. Name 0-20
characters
Unnamed
2. Button 1
3. Button 2
4. Button 3
4. Button 4
7. Serial Number Read Only
8. Model Number Read Only
9. Firmware Version Read Only
10. Battery Status Read Only
2. Replace Keychain Remote
3. Delete Keychain Remote
Topic Range Default
4. Auxiliary Siren Menu
Select Auxiliary Siren
1. View/Edit Auxiliary Siren
1. Name 0-20
characters
Unnamed
2. Chime Enable Yes/No No
3. Exit Tone Enable Yes/No No
4. Entry Tone Enable Yes/No No
5. Siren Enable Yes/No Yes
6. Latch Strobe Yes/No Yes
7. Serial Number Read Only
8. Model Number Read Only
9. Firmware Version Read Only
10. Battery Status Read Only
2. Replace Auxiliary Siren
3. Delete Auxiliary Siren
Advanced Menu Option 2: Comm (Communicator) Menu.
The third item in the Advanced Menu is the Communicator
Menu. The Communicator Menu allows you to specify the
reporting protocol and telephone number of each of the
system’s four communicators. The menu also allows you to
specify which system events are reported to each
communicator. The Communicator Menu includes the topics
listed in the next table.
Topic Range Default
Select Communicator Number
1. View/Edit Comm
1. Comm Name 0-20 characters 1: SIA
2-4: Unnamed
2. Comm Type SIA or undefined 1: SIA
2-4: undefined
3. Report Account
Number
0-5 characters Blank
4. Dial Attempts 0-15 15
5. Dial Area Code 0-8 characters 1 800
6. Dial Phone
Number
0-16 characters Blank
7. Installer Login Yes/No 1: No
2-4: Yes
8. Program Error Yes/No 1: No
2-4: Yes
9. Burglary Alarm Yes/No 1: Yes
2-4: No
10. Fire Alarm Yes/No 1: Yes
2-4: No
11. Gas Alarm Yes/No Yes
12. Panic Alarm Yes/No 1: Yes