User's Manual

23
2. Enter the master user code.
The keypad beeps. The message window displays:
ENTER USER #.
3. Enter the number of the user to whom you want to
assign a code (1 to 8).
The keypad beeps. The message window displays:
ENTER NEW CODE.
4. Enter the new code.
The keypad beeps.
5. Test the new code by turning the system on, then
using the code to turn the system off.
MASTER
CODE
NOT READY ALL ON INSTANT
DOOR CHIME NO AC MOTION OFF
TROUBLE TEST LINE CUT LOW BATT
ALARM MEMORY
AUXILIARY CODES
CANCELED BYPASS ENTER MASTER USER
:
I
:
I
:
CALL 800-445-0872 ZONE
:
I
:
I
:
NEW CODE
1. Press the OPTIONS key until the message window
displays: ALARM MEMORY, ENTER CODE.
2. Enter your user code.
The k
eypad beeps. The message window shows
which zones were in alarm.
ALARM MEMORY
ENTER CODE
NOT READY ALL ON INSTANT
DOOR CHIME NO AC MOTION OFF
TROUBLE TEST LINE CUT LOW BATT
ALARM MEMORY
AUXILIARY CODES
CANCELED BYPASS
ENTER
MASTER USER
:
I
:
I
:
CALL 800-445-0872 ZONE
:
I
:
I
:
NEW
CODE
How to Add an Auxiliary Code continued
How to View Alarm Memory
You can use alarm memory to determine which zones were in alarm.
How to Turn the Door Chime On or Off
When you turn the door chime on, the keypad beeps if a protected door or
window is opened while the system is turned off. To turn the chime on or off,
do the following:
Note: If you turn the door chime on and the keypad does not beep, the
chime feature may have been turned off at installation. Call Customer Care
for assistance.
How to Add an Auxiliary Code
You can assign an auxiliary user code to the members of your family, or to
people who need temporary access to your home. Housekeepers, guests,
and housesitters can all be given auxiliary codes. You can assign as many as
8 codes, but for your security, you should limit the number of auxiliary codes
you assign, and delete any codes that are not in use.
To assign an auxiliary code, do the following:
22
1. Press the OPTIONS key until the message window
displays: DOOR CHIME, ENTER CODE
2. Enter your code.
The keypad beeps. The message window displays
READY, DOOR CHIME.
DOOR CHIME
ENTER CODE
NOT READY ALL ON INSTANT
DOOR CHIME NO AC MOTION OFF
TROUBLE TEST LINE CUT LOW BATT
ALARM MEMORY AUXILIARY CODES
CANCELED BYPASS
ENTER MASTER USER
:
I
:
I
:
CALL 800-445-0872 ZONE
:
I
:
I
:
NEW CODE
1. Press the OPTIONS key until the message window
displays: AUXILIARY CODES, ENTER
MASTER
CODE
.
AUXILIARY
CODES ENTER
MASTER CODE
NOT READY
ALL ON INSTANT
DOOR CHIME NO AC MOTION OFF
TROUBLE
TEST LINE CUT LOW BATT
ALARM MEMORY
AUXILIARY CODES
CANCELED BYPASS
ENTER
MASTER
USER
:
I
:
I
:
CALL 800-445-0872 ZONE
:
I
:
I
:
NEW
CODE
BrinksKeyPadPrinterSprd.2.22.06 2/22/06 3:06 PM Page 56