User's Manual Part 1

Keychain Controls and Functions
USING YOUR SECURITY SYSTEM
[www.LifeShield.com]
[46]
1. OFF – Security Key: Disarms system or cancels alarm
2. AWAY – Security Key: Arms system in Away mode
3. PANIC – Security Key: Simultaneously presses the AWAY and STAY keys
4. STAY – Security Key: Arms system in Stay mode
5. Status LED (See Below)
1
2
5
4
3
Keychain Remote Controls and Functions
The Keychain Remote allows you to communicate with your LifeShield Home Security system from outside your home with a range of approximately 15 feet
from any GC.
You can use the Keychain Remote to arm and disarm the system, and send Panic alarms to the Alarm Monitoring Center in case of an emergency.
Figure 19. Keychain Remote - Front View
Keychain Press Indicators
Press Stay or Away (ARM)
Audible Visual
1 beep Green blinks – system was successfully armed
3 beeps Red blinks – system is “Not Ready To Arm”
Press Off (DISARM)
Audible Visual
2 beeps Green blinks – system was successfully disarmed
5 beeps Red blinks followed by 2 beeps/Green blinks –
system was disarmed, but was disturbed in some
way prior to being disarmed