User's Manual Part 1

INSTALLING YOUR SECURITY SYSTEM
[www.LifeShield.com]
[30]
Installing the Siren Detector
b.) Screws & wall anchor installation
Drill a 1/4 inch hole in each of the marked locations from the previous step and insert the (provided) wall anchors.
Secure with the screws provided, making sure that the arrow on the Bracket faces the hazard detector.
Mount the Siren Detector
Remove Battery Insulator Tab
Turn the Siren Detector over and locate the battery insulator tab. Remove the tab by pulling it straight out. Discard the battery
insulator tab once it is removed.
AFTER REMOVING THE BATTERY
INSULATOR TAB, PRESS DOWN
ON THE TOP OF THE BATTERY TO
MAKE SURE IT HAS NOT BEEN
DISLODGED IN THE PROCESS OF
REMOVING THE TAB.
!
Install the Siren Detector
With the Siren Detector Bracket securely mounted on the ceiling next to the hazard detector, align the Siren Detector with the
Bracket (as shown) and snap it securely onto the Bracket.
Add the Siren Detector to the LifeShield System
Once the Siren Detector has been mounted it must then be “added” to the LifeShield system. You will need a Handset
or Console to add the Siren Detector.
THE SIREN DETECTOR MUST BE
SUCCESSFULLY TESTED
(TOGETHER WITH THE HAZARD
DETECTOR) AT LEAST TWICE
PER YEAR. A LOW BATTERY OR
OTHER CONDITION CHANGES
MAY CAUSE POOR PERFORM-
ANCE OF THE HAZARD DETEC-
TOR AND/OR SIREN DETECTOR.
ONCE SIREN DETECTORS ARE
INSTALLED, TESTING THE
SIRENS WITH EXISTING HAZARD
DETECTORS MAY RESULT IN A
FIRE OR CARBON MONOXIDE
MESSAGE BEING SENT TO THE
MONITORING CENTER, RESULT-
ING IN AN EMERGENCY
DISPATCH TO YOUR PREMISES.
THERE ARE TWO OPTIONS TO
AVOID THIS SITUATION.
OPTION A. TEMPORARILY
DISABLE THE MONITORING OF
YOUR SYSTEM THROUGH YOUR
LIFESHIELD WEB ACCOUNT
PRIOR TO TESTING THE HAZARD
DETECTORS. RE-ENABLE MONI-
TORING AFTER YOU HAVE COM-
PLETED TESTING.
OPTION B. ON THE HANDSET OR
CONSOLE, PUT THE SYSTEM
INTO "SENSOR TEST" MODE
(UTILITIES -> SYSTEM TEST ->
SENSOR TEST ) PRIOR TO
TESTING THE HAZARD DETEC-
TORS. THE SYSTEM WILL RE-
TURN TO NORMAL OPERATION
WHEN THE TEST IS COMPLETED.
!