User's Manual Part 1

INSTALLING YOUR SECURITY SYSTEM
[www.LifeShield.com]
[11]
Installing the Handset
Handset Kit Contents
HSC1000 Handset
CHC1000 Charging Cradle
PSC0101 Power Adapter
Belt Clip
LS180 Ni-MH Rechargeable Battery Pack
Install the Handset and Charger
Install Battery Pack
a) Open the Battery compartment.
b) Insert the Battery plug into the two-pin jack, and insert the Battery.
t
!
The jack is keyed so that the plug
can only be inserted in one
direction. Be careful not to
crimp the wire.
The Handset display will illuminate
when the Battery is connected.
Use only LifeShield rechargeable
Battery Packs specified for your
Handset.
Replacement Battery Packs are
also available through LifeShield
Customer Support at 1-888-392-
2044 or online at
www.LifeShield.com. Use only the
supplied AC power adapter. Do not
use any other adapter.
Place the power adapter cord so
that it does not create a trip
hazard, or become pinched and
create an electrical hazard.
c) Replace the Battery cover.
Use only the LifeShield LS180 Battery Pack.
i
Caution: RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
!