User's Manual Part 1

INSTALLING YOUR SECURITY SYSTEM
[www.LifeShield.com]
[10]
Installing the Base
Connect the Base to the Internet
(and Telephone Line)
Connecting the Base
a) Connect the Internet cable (provided) between the Internet port on your router and the back of the Base as shown below.
b) Connect the telephone cord (provided) to the Base and telephone wall jack.
Use only LifeShield LS180
Rechargeable Battery Pack
supplied with your Base. Use only
PSC0101 Power Supply.
Replacement battery packs are
also available through the
LifeShield’s Customer Support at
1-888-392-2044 or online at
www.LifeShield.com. Use only the
supplied AC power adapter. Do not
use any other adapter.
Place the power adapter cord so
that it does not create a trip hazard,
or become pinched and create an
electrical hazard.
When Using a DSL Modem
a) Plug a DSL filter into the telephone splitter (which is in turn plugged into a wall phone jack). Plug one end of the telephone
cord (provided) into the DSL filter and the other end into the back of the Base. Finally, connect the telephone cord from your
router back into the telephone splitter as shown.
b) Connect the Internet cable provided in the kit to an available Internet port on the modem/router and the port on the back of
the Base.
If you are installing a router for the
first time, refer to your router
installation instructions before
connecting the Base.
i
!