User's Manual

ManualsBrandsLifeShield ManualsElectronicsBSC1001 Base Unit

REMOTE ARMING/DISARMING OF YOUR SYSTEM

There are many ways to remotely arm or disarm your system.

• Keychain Remote - from the exterior of your home

•

LifeShield.com

- from a computer with broadband Internet access

• Mobile LifeShield - from a mobile phone or PDA

Keychain Remote

Arm your system as you close the door behind you or disarm your system before you enter your home using

your Keychain Remote. It works from within 15 feet of your door, and does not require a User Code.

ARM

1. Press STAY or AWAY on Keychain Remote

2. The system will respond with a light blink and beep, letting you know

the system is armed

DISARM

1. Press OFF to disarm the system before entering

2. The system will respond with a light blink and beep, letting you know the system is disarmed

Staying Home for the Evening–

Instant Arming

Arm the system using the INSTANT key. No Exit or Entry Delay is

provided with Instant arming.

INSTANT STAY is typically used in the evening

when you are not expecting anyone to enter your home. Opening a door

when armed INSTANT will generate an alarm immediately.

ARM

1. Press INSTANT on your Console

2. Enter your User Code

DISARMING YOUR SYSTEM

DISARM

1. Press CANCEL/OFF on your Console

2. Enter your User Code

NOTE: TO CANCEL AN ALARM, FOLLOW THE ABOVE DISARM INSTRUCTIONS.

PANIC ALARM

For Alarm Monitoring subscribers, the Alarm Monitoring Center will

not call to verify a PANIC alarm, but will immediately call the authorities

and there may not be an opportunity to cancel the dispatch.

For Personal Monitoring subscribers, the PANIC key will only generate a

local alarm and there will be no emergency dispatch.

ALARM

On the Console, press and hold PANIC for 2 seconds (if enabled)

2. Select Police, Medical or Fire (Alarm Monitoring

Subscribers Only: If no selection is made, Police will be default selection)

On the Keychain Remote, if PANIC is enabled, press STAY and AWAY

at the same time when near your home and the alarm will sound.

PHNBK MENU CONNCT

WEATHR

ALERTS

Ready to Arm

Thu 2/8 11:48a

Calls: 0 Msg:0

BACK CONNCT WEATHR ALERTS

Press 1: Police

Press 2: Medical

Press 3: Fire

SELECT

An alarm generated by pressing the PANIC

button on your LifeShield home security

system will send a message to the Alarm

Monitoring Center to contact the authorities

without making a call to you to verify alarm.