User Manual

Brinks Keypad 5
1) Enter the building through a designated entry door. The Keypad’s message window displays ALARM. The
siren is sounding and the ON light is lit.
2) Enter your user code. The Keypad beeps. Wait for Brink’s to call. Be prepared to give the Brink’s operator your
code word. Do not use the telephone if you intend to cancel the alarm. If your telephone line is busy, Brink’s
may dispatch emergency personnel to your home, which could result in a false alarm fine.
Turning the System Off After an Alarm in Your Absence
Follow these instructions if there was an alarm at your house while you were away and the sirens are no longer
sounding.
1) Enter the building through a designated entry door. The ON light blinks. The sirens and speakers are silent. The
Keypad shows the numbers of the zones in alarm and its message window displays ALARM MEMORY.
2) Enter your user code to turn the system off. The Keypad beeps for one second. The Keypad shows the numbers
of the zones that were in alarm and displays ALARM MEMORY.
3) Refer to the Pop-Up Grid Identification Card to verify the location of the zones that were in alarm.
4) To silence the Keypad’s beeping and clear Alarm Memory, press the CANCEL key.
5) If you do not know what caused the alarm, review the system’s alarm.
¾ System Options
The system has five options:
1) Bypass
2) Door Chime
3) Auxiliary Codes
4) Alarm Memory
5) Test
How to Bypass a Zone
When you bypass a zone, the system ignores it. Use this whenever you want to turn the system on, but leave a
particular Sensor off. The bypass is automatically canceled when you turn the system off. To bypass a zone, do the
following:
1) Press the OPTIONS key until the message window displays: BYPASS, ENTER ZONE #.
2) Enter the number of the zone you wish to bypass. The Keypad beeps. The message window displays READY,
BYPASS. The number of the bypassed zone lights momentarily.
How to Turn the Door Chime On or Off
When you turn the door chime on, the Keypad beeps if a protected door or window is opened while the system is
turned off. To turn the chime on or off, do the following:
1) Press the OPTIONS key until the message window displays: DOOR CHIME, ENTER CODE
2) Enter your code. The Keypad beeps. The message window displays READY, DOOR CHIME.
How to Add an Auxiliary Code
You can assign an auxiliary user code to the members of your family, or to people who need temporary access to
your home. Housekeepers, guests, and housesitters can all be given auxiliary codes. You can assign as many as 8
codes, but for your security, you should limit the number of auxiliary codes you assign, and delete any codes that are
not in use. To assign an auxiliary code, do the following:
1) Press the OPTIONS key until the message window displays: AUXILIARY CODES, ENTER MASTER CODE.
2) Enter the master user code. The Keypad beeps. The message window displays: ENTER USER #.
3) Enter the number of the user to whom you want to assign a code (1 to 8). The Keypad beeps. The message
window displays: ENTER NEW CODE.
4) Enter the new code. The Keypad beeps.
5) Test the new code by turning the system on, then using the code to turn the system off.