TDS
TECHNICAL DATA SHEET
THD LP SPC 22 mil Page 1 Issued: 5-23-2022
PHYSICAL PROPERTIES (FLOATING MULTILAYER MODULAR FLOORING) – 6.5 MM GAUGE / 22 MIL WEAR LAYER
Collection
Plank – 7.13” x 48.03”
Plank – 8.98” x 48.03”
Plank – Multi-Width
Size 7.13” x 48.03” (181 mm x 1220 mm) 8.98” x 48.03” (228 mm x 1220 mm)
4.96” x 48.03” (126 mm x 1220 mm)
7.13” x 48.03” (181 mm x 1220 mm)
8.98” x 48.03” (228 mm x 1220 mm)
Overall Gauge
6.5 mm (.256”)
6.5 mm (.256”)
6.5 mm (.256”)
Wear Layer
22 mil (0.55 mm)
22 mil (0.55 mm)
22 mil (0.55 mm)
Core
5.5 mm (0.217") SPC Rigid Core
5.5 mm (0.217") SPC Rigid Core
5.5 mm (0.217") SPC Rigid Core
Pad
1.0 mm (0.039") IXPE
1.0 mm (0.039") IXPE
1.0 mm (0.039") IXPE
Use
Light Commercial and Residential
Light Commercial and Residential
Light Commercial and Residential
Profile
Painted Edge
Painted Edge
Painted Edge
Finish
UV Cured Polyurethane with Aluminum
Oxide
UV Cured Polyurethane with Aluminum
Oxide
UV Cured Polyurethane with Aluminum
Oxide
Antimicrobial
Included in Finish and Pad
Included in Finish and Pad
Included in Finish and Pad
Embossing
Embossed
Embossed
Embossed
Pieces/Carton
8 pieces
6 pieces
6,8,10 pieces depending on model
Coverage/Carton 19.05 sq.ft.(1.77 m
2
) 17.98 sq.ft. (1.67 m
2
)
17.98, 19.05, 23.44 sq.ft. (1.67, 1.77, 2.17
m
2
) depending on model
Limited Warranty
Light Commercial – 20 Years
Residential - Lifetime
Light Commercial – 20 Years
Residential - Lifetime
Light Commercial – 20 Years
Residential - Lifetime
STANDARDS – SAFETY & PERFORMANCE
Standard
Description
Requirements
Results
ASTM E648
Critical Radiant Flux (Radiant Panel)
Class 1: > 0.45 W/cm
Passed Requirements
ASTM E662 Smoke Density Flaming and Non-Flaming < 450 Passed Requirements
ANSI A137.1
Dynamic Coefficient of Friction
No Standard. Check Local Requirement
DCOF: 0.38
ASTM F970
Static Load
0.13 mm
0.002 mm at 250 psi
ASTM F1914
Short Term Indentation
< 0.007 in.
Passed Requirements
ASTM F2199
Dimensional Stability
< 0.25% per lineal ft.
Passed Requirements
ASTM F925
Chemical Resistance
No more than “Slight Change”
Passed Requirements
ASTM F1514
Resistance to Heat
Average ∆E < 8.0
Passed Requirements
ASTM F1515
Resistance to Light
Average ∆E < 8.0
Passed Requirements
ASTM E2180
Antimicrobial
No Standard
> 99.99% Reduction
ASTM F963
Heavy Metals
Per F963 Limits
Not detected
CPSC-CH-C1001-09.4
Phthalates
0.1%
Not detected
STANDARD - SOUND
Assembly
ASTM E90
ASTM E492
ASTM E2179
Results (Remarks)
6” Concrete Slab with Drop Ceiling STC 61 IIC 65 Not Applicable
All tested assemblies pass IBC
5
requirements of
STC > 50 and IIC > 50 for multi-story dwellings
ENVIRONMENTAL AND COMPLIANCE
Certification
Description
Greenguard Gold
Indoor Air Quality. Meets US EPA and California Department of Public Health Section 01350 requirements for
Children and Schools.