User Guide

A
Open the case
B
Plug into electrical outlet
On the right side of the case you will find the power
cord wrapped up and tucked into the insert. Remove
this and plug into an electrical outlet.
C
Remove camera from case
Inside the case, next to the main power cord you will
find the camera. Remove the camera (PTZ or Trackit
Cam) from the case, being careful to watch the cord
as you remove it.
D
Remove camera clamp from case
Remove the camera clamp or optional tripod from
the case and attach it to the camera.
E
Plug in the Trackit Cam
Plug the Trackit Cam directly into the PC USB port
(photo). Do not use the Trackit F USB hub port
F
Plug in PTZ Camera
Plug in power cord and ethernet
cable to the rear of PTZ
G
Turn on the computer
Turn on the computer using the
power button on the right side
of the laptop
H
Turn on the amplifier
Turn on the amplifier and connect it via the
acquisition software
®
EEG SYSTEM
QUICK START GUIDE
Trackit T4A
Trackit Mk3
April 2021