Technical Manual

Document No. 6-0101 Rev. F Page 7 of 40
PRESSURE RELIEF SAFETY VALVE - Each cell in the battery employs a pressure relief safety
valve. The valve is designed to release excess pressure that builds up over time to vent the
small quantity of gasses that do not recombine inside of the battery. Once the pressure is
released, the valve automatically re-seals. The gasses that escape are mainly oxygen and
some hydrogen, and these gasses rapidly dissipate into the atmosphere.
TERMINALS - Lifeline® AGM batteries are available in a variety of terminal configurations.
Most terminal types are made of copper alloy which provide a long lasting, low resistance
electrical connection. Additionally, the copper alloy terminals offer increased environmental
protection and personal safety in comparison to commonly used lead terminals. Refer to the
pictorial in Section 2.3 to see a detailed view of the various terminal types that are available.
HANDLES – Lifting handles are incorporated into all Lifeline® AGM batteries. This provides
easier handling for lifting, carrying and installation.