Use Instructions

29
Questions? Call 1-800-635-6156
Air Travel
Because it is a cellular communication device, the GoSafe 2
Mobile Pendant may interfere with aircraft communications
while in normal Stand-by mode. For this reason, the Pendant
has a Sleep Mode. Be sure to place your Pendant in Sleep
Mode during air travel. Please see instructions for putting your
Pendant in Sleep Mode on page 32.
The GoSafe 2 Mobile Pendant can only place a Help Call
when in Stand-by mode, and when the AT&T wireless
network is available and when it has sucient battery charge.
Charging the battery
Your GoSafe 2 Mobile Pendant is powered by a rechargeable
battery. This means that it must be re-charged regularly, as
indicated, for proper function. The Pendant will chime once and
the Indicator Light will ash orange whenever the Pendant initially
needs to be charged. Typically, it will take less than 45 minutes to
charge your GoSafe 2 Mobile Pendant if you put it in the charger
at this initial charge indication point. It will take longer than this
if you wait additional time after this indication point to put the
Pendant in the charger. Your Pendant is fully charged when it
chimes and the Indicator Light turns to a steady green. If you do
not charge the Pendant at the time of Initial Charge Indication,
the battery charge will continue to deplete and the orange light
will continue to blink. Once it reaches a critical power state, the
Pendant will reach the Critical Charge Indication. When this
happens, the Pendant will play a voice prompt: “Your Help Button
is now out of power and will shut down. Please charge your
device as soon as possible”. It may take more than one hour to
MHB3_7250_IFU 2020c.indd 29 2/15/21 2:28 PM