Use Instructions

95
Questions? Call 1-800-635-6156
Table 4 – Recommended* Separations Distances between Portable and Mobile RF
Communications equipment and HomeSafe/GoSafe devices
The HomeSafe/GoSafe are intended for use in the electromagnetic environment in
which radiated disturbances are controlled. The customer or user of the HomeSafe/
GoSafe can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF Communication Equipment and HomeSafe/
GoSafe as recommended below, according to the maximum output power of the
communications equipment.
Max Output
Power (Watts)
Separation
(m) 150kHz to
80MHz
d = 1.17√P*
Separation
(m)
80 to
800MHz
d = 0.35√P
Separation
(m)
800MHz to
2.5GHz
d = 0.70√P
Separation
(m) (7200C)
800MHz to
2.7GHz
d= 0.6 √P
0.01 0.117 .035 .07 0.6
0.1 0.37 .11068 .22136 0.199
1 1.17 .35 0.7 0.6
10 3.7 1.1068 2.2136 1.9
100 11.7 3.5 7 6
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to
the frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation
is aected by absorption and reection from structures, objects, and people.
Caution
The values in Table 4 above are approximate. The GoSafe and HomeSafe devices are
not intended to be used in an environment where high power RF sources exist (for
example, radars, high power professional walkie talkie, radio stations transmitters, etc.).
In case where the device is used in a near by high power RF source, the separation
distances above are recommended to achieve optimal performance of the GoSafe and
HomeSafe devices.
Agency Submission File