Use Instructions

90
Questions? Call 1-800-635-6156
Warning
Portable RF communications equipment (including peripherals such as antenna
cables and external antennas) should be used no closer than 30 cm (12 inches) to any
part of the 7200C and 7000L devices. Otherwise, degradation of the performance of
this equipment could result.”
EMC Informational Tables
Table 1 – Guidance and Manufacturer’s Declaration – Emissions
The HomeSafe/GoSafe devices are intended for use in the electromagnetic
environment specied below. The 7000MHB and 7100MHB devices are provided
with a battery power adapter charger. The customer or user of the HomeSafe/GoSafe
should ensure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment – Guidance
RF Emissions
CISPR 11
Group 2 The HomeSafe/GoSafe devices must emit
Electromagnetic energy in order to perform
its intended function. Nearby electronic
equipment may be aected.
RF Emissions
CISPR 11
Class B
Harmonics
IEC 61000-3-2
N/A for 7000PHB/
PHW, 7000AHB
and 7000MHB/
7100MHB.
Class A for charger
The 7000PHB/PHW, 7000AHB and
7000MHB/7100MHB are Battery Powered.
The 7000L and 7200C communicators and
the 7000MHB/7100MHB power chargers
are suitable for use in all establishments,
including domestic, and those directly
connected to the public low-voltage power
supply network that supplies buildings
used for domestic purposes.
Flicker
IEC 61000-3-3
Complies
Agency Submission File