Use Instructions

85
Questions? Call 1-800-635-6156
For compliance to UL 1637 for U.S. installations only:
A clear, plastic power supply retaining strip is provided in the packaging with this
system. Its purpose is to prevent the home communicator power supply from
accidentally pulling out of the ac wall outlet under force. To use:
1. Plug the home communicator power supply into the outlet you select to power your
system, following the instructions and precautions herein.
2. Clean the wall area roughly 3” on either side of the ac power outlet cover with
a paper towel or cloth and a general purpose household cleaner such as glass
cleaner. Do not use furniture polish or oil-based cleaners for this step as this
cleaning is to ensure that the adhesion area is devoid of any dirt, oil or grease that
would prevent the adhesive from sticking properly.
3. Spray the cleaner on the cloth and gently wipe the area on either side of the outlet
cover as described in step 2. Do not spray the cleaner on the wall.
4. Ensure the area you cleaned in step 2 is dry prior to proceeding to step 5.
5. Peel the release liner from the adhesive panels on the strip and ax it across the
back of the power supply, adhering the 2 adhesive panels to the wall on each side
of the ac power outlet cover.
Environmental – Help Buttons
Operating Storage Bathing
*
Temperature 32° F to 104° F
(0° C to 40° C)
-4° F to 140° F
(-20° C to 60° C)
-Up to 122° F
(50° C)
Relative
Humidity
10% to 90% (non-condensing) 10% to 90% (non-
condensing)
Atmospheric
Pressure
101 kPa to 80 kPa
(approximately 0-6600 ft/0-
2000 m)
N/A
Altitude 6,600 feet (2 km) Maximum N/A
*For a maximum duration of 30 minutes.
Environmental – 7200C Communicator
Operating Storage
Temperature 32°F (0°C) to 122°F (50°C) -4°F (-20°C) to 158°F (70°C)
Relative Humidity 10% to 90%
(non-condensing)
Agency Submission File