Use Instructions

69
Questions? Call 1-800-635-6156
Software Failure End Device
(7000PHB/7000PHW/7000AHB/7000MHB/7100MHB)
Alarm Event
Description
In the event that a device senses it has a Software Error, a
Warning Message is displayed
Priority Medium
Device Action May have limited operation, depending on the failure
Alarm Event
Reported/Displayed
Locally?
Yes. Message Button Flashes. Voice Message plays upon
pressing the Message Button.
Alarm Event
Reported to Lifeline?
Yes. A silent Maintenance Signal is sent to the Response
Center by the Communicator. Upon receiving the
Maintenance Signal, the Response Center prioritizes the
response and contacts the Subscriber to verify the status of
their equipment.
NO PHONE LINE - Communicator (7000L)
Alarm Event
Description
In the event that the Communicator loses its connection to
the phone line, a Warning Message is displayed.
Priority Medium
Device Action Any alarms generated will be sent to the Response Center
once connection to the phone line is established.
Alarm Event
Reported/
Displayed Locally?
Yes. Message Button ashes. Voice Message plays upon
pressing the Message Button. This is an alarm that will self-
cancel once connection to the phone line is re-established.
Alarm Event
Reported to Lifeline?
No. If connection to the phone line is lost, a Maintenance
Signal cannot be sent by the Communicator to the Response
Center.
Agency Submission File