Use Instructions

65
Questions? Call 1-800-635-6156
HELP NEEDED Fall Detected End Device (7000MHB/7100MHB) out of range
of Communicator
Alarm Event
Description
Help Alarm initiated by the End Device detecting a fall.
Priority High
Device Action Operates normally
Alarm Event
Reported/
Displayed Locally?
Yes. When the GoSafe Mobile Button has detected a fall, it
plays a Voice Message and its LED ashes red.
Alarm Event
Reported to Lifeline?
Yes. The GoSafe Mobile Button sends a "fall detected"
Help Alarm Signal to the Response Center from anywhere
wireless signal is available on the AT&T wireless network.
Upon receiving the "fall detected" Help Signal, the Response
Center calls the GoSafe Mobile Button to establish contact
with the Subscriber and to see what kind of help they need.
Device Error (Medium Priority) Alarms
The HomeSafe/GoSafe Communicator and Help Button alarms described below are
automatically generated alarms designed to periodically let the Response Center know
that the Communicator and Help Buttons are working properly.
Alarm Event Type
ac Power Lost Communicator (7200C/7000L)
Alarm Event
Description
In the event that the Communicator loses its connection to
ac power, a Warning Message is displayed
Priority Medium
Device Action Switches to backup battery and operates normally
Alarm Event
Reported/Displayed
Locally?
Yes. The Message Button on the Communicator ashes
yellow-orange. A Voice Message plays upon pressing the
Message Button.
This is an alarm that will self-cancel once connection to the
ac power is re-established.
Alarm Event
Reported
to Lifeline?
No.
Agency Submission File