Use Instructions
60
Questions? Call 1-800-635-6156
The Communicator self-cancels certain Medium Priority
alarms if the cause of the alarm is corrected, shutting o the
ashing message LED.
GoSafe Mobile Button Alarms
Introduction
There are two types of alarms processed by the
GoSafe Mobile Button:
• High Priority – Require immediate response
(by the Response Center)
• Medium Priority – Require prompt response
(by the operator/user)
Additionally, the Mobile Button also plays informational
messages and conrmation alerts that notify you of conditions
that need attention but do not qualify as alarm conditions
(e.g. installation prompts).
Note: If multiple alarms occur at the same time, all alarms
are processed and displayed, but the alarms are ordered rst
by priority and then by occurrence, with the newest, highest
priority alarms at the top of the list. The alarm precedence
is in the following order: High priority, Medium priority, and
Informational messages.
Note: Not all alarms are available in every mode (e.g. during
installation); some alarms are mode-dependent.
Audible and Visual Alarm Indicators
When the device detects a High priority alarm: The light on the
GoSafe Mobile Button ashes red, the device audible alarm
sounds and a recorded voice message is played.
Agency Submission File