Use Instructions
58
Questions? Call 1-800-635-6156
Alarms
Communicator Alarms
Introduction
There are two types of alarms processed by
the HomeSafe/GoSafe Communicator:
• High Priority – Require immediate response
(by the Response Center)
• Medium Priority – Require prompt response
(by the operator/user)
Additionally, the Communicator also displays informational
messages and conrmation alerts that notify you of conditions
that need attention but do not qualify as alarm conditions (e.g.
installation prompts).
Note: If multiple alarms occur at the same time, all alarms
are processed and displayed, but the alarms are ordered rst
by priority and then by occurrence, with the newest, highest
priority alarms at the top of the list. The alarm precedence
is in the following order: High priority, Medium priority, and
Informational messages.
Note: Not all alarms are available in every mode (e.g. during
installation); some alarms are mode-dependent.
Audible and Visual Alarm Indicators
When the device detects a High priority alarm: The Help
button on the Communicator ashes red, the device audible
alarm sounds and a recorded voice message is played.
Agency Submission File