Use Instructions
51
Questions? Call 1-800-635-6156
Air Travel
Because it is a cellular communication device, GoSafe may
interfere with aircraft communications while in normal Stand-
by mode. For this reason, GoSafe has a Sleep Mode. Be sure to
place it in Sleep Mode during air travel. Please see instructions
for in Sleep Mode on page 54.
The GoSafe Mobile Button can only place a Help Call when
not in sleep mode, when it is suciently charged, and when
the AT&T wireless network is available.
Charging the battery
Your GoSafe Mobile Button is powered by a rechargeable battery.
This means that it must be re-charged regularly, as indicated, for
proper function. It will chime once and the Indicator Light will
ash orange whenever it initially needs to be charged. When
in proximity of your Communicator, the message light on your
Communicator will also illuminate. If you press the message
button, the Communicator will play a voice message indicating
that your GoSafe Mobile Button needs to be charged. Typically,
it will take approximately 45 minutes to charge your GoSafe
Mobile Button, if you put it in the charger at this initial charge
indication point. It will take longer than this if you wait additional
time after this indication point to put the Mobile Button in the
charger. GoSafe is fully charged when it chimes and the Indicator
Light turns to a steady green. If you do not charge it at the Initial
Charge Indication, the battery will continue to deplete and the
orange light will continue to blink. Once it reaches a critical power
state, GoSafe will provide a Critical Charge Indication. When this
happens, the Mobile Button will play a voice prompt: “Your Help
Agency Submission File