Use Instructions

20
Questions? Call 1-800-635-6156
Caution
Safety information
1. If you have multiple phones in your home, and any of
them are left o the hook, the Communicator will not be
able to place a Help Call. This problem can be addressed
by plugging the Communicator phone cord into an RJ31X/
CA38A type jack, sometimes referred to as a “line seizure
jack”, on your main phone line. Contact your phone
company or a local home security system provider for
further assistance with this option. If (and only if) there is
only one phone jack in your home, there is an RJ31X jack
in the Communicator that is designed to seize the line if
installed properly. Please refer to the Customer Premises
Equipment and Wiring diagram on page 72 in the Safety
and Regulatory Compliance section. For the 7000L
Communicator to function properly with an RJ31X/CA38A
type jack, a special phone cord is required. The phone cord
shipped with the 7000L Communicator will not support
this function. If you plan to use your system with this type
of jack, please call Lifeline technical support to order the
proper cord to support this function.
2. This product cannot be used on party lines/shared
service lines.
3. If you have DSL Internet service, you will need to install a
DSL lter between your phone jack and the Communicator.
Contact your phone company to obtain a DSL lter or
purchase one from a local electronics store.
Agency Submission File