Use Instructions
13
Questions? Call 1-800-635-6156
3. Release the Message button. The Communicator will
announce: “Please press the ashing orange Message
button after you have completed the range test. Begin
Signal Range Test.” The Communicator is now in Signal
Range Test mode. Proceed to step 4. You will exit this mode
in step 6.
4. Press your wearable Help Button. The Communicator will
beep and play a voice message and the light on your Help
Button will ash green to indicate that the Communicator
has received the signal.
5. Move to other parts of your home and press your wearable
Help Button again. Listen for the beep and check to see if
the green light is ashing.
6. Once you have tested dierent locations in your
home and immediately outside your home, return to the
Communicator and press the ashing orange Message
button. Your system will exit range test mode and return to
normal operation.
Battery information
All Philips Lifeline equipment contains batteries that can
only be replaced by Philips Lifeline in the factory, or in some
cases, by a qualied technician in the eld. No batteries in
the equipment are user-serviceable. The equipment will
automatically send a silent maintenance signal to Lifeline
when the battery needs to be replaced. Philips Lifeline or its
representative will contact you directly to make arrangements
for a replacement.
Agency Submission File