User Manual

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
(a
) Field strengths from fixed transmitters, such as base stations for radio
(cellular/ cordless) telephones and land mobile radios, amateur radio, AM
and FM radio broadcast and TV broadcast cannot be predicted theoretically
with accuracy. To assess the electromagnetic environment due
to fixed RF
transmitters, an electromagnetic site survey should
be considered. If the
measured field strength in the
location in which the GoSafe Lite is used
exceeds the applicable RF compliance level above, the GoSafe Lite should be
observed to verify normal operation.
If abnormal performance is observed,
additional measures may be
necessary, such as re-orienting or relocating the
GoSafe Lite.
(b)
Over the frequency range 150 kHz to 80 MHz, field strengths should be
less
than 3 V/m.
Confidential Draft for Agency Submission Only.
Not for Posting on any Public-Facing Website
Not for dissemination to the public without the express written consent of Philips.