User Manual

Emissions Test Compliance
RF Emissions
CISPR 11
Group 2
RF Emissions
CISPR 11
Class B
Harmonics
IEC 61000-3-2
N/A for EUT
Class A for charger
Electromagnetic Environment – Guidance
The GoSafe Lite 7150MHB must emit
Electromagnetic energy in order to perform its
intended function. Nearby electronic equipment
may be affected.
The EUT is Battery Powered.
The GoSafe Lite 7150MHB power charger is
suitable for use in all establishments, including
domestic, and those directly connected to the
public low-voltage power supply network that
supplies buildings used for domestic purposes.
Flicker
IEC 61000-3-3
Table 2 - Guidance and Manufacturer’s declaration – Immunity
The GoSafe Lite 7150MHB is intended for use in the electromagnetic
environment specified below. The customer or user of the GoSafe Lite
should ensure that it is used in such an environment.
Complies
EN/IEC 60601
Test Level
Compliance
Level
Immunity Test
Electrostatic
Discharge (ESD)
EN/IEC 61000-4-2
±2 kV for
power
supply lines
±2 kV for
power supply
lines ±1 kV for
input/output
lines
6k
V C
ontact
8kV Air
6k
V C
ontact
8kV Air
Electromagnetic
Environment – Guidance
Floors should be wood, concrete
or ceramic tile. If floors are
synthetic the relative humidity
should be at least 30%
Electrical fast
transient/burst
EN/IEC 61000-4-4
(only for battery charger
power supply)
EMC Informational Tables
Table 1 - Guidance and Manufacturer’s Declaration – Emissions The
EUT "GoSafe Lite" model 7150MHB is intended for use in the
electromagnetic environment specified below. The EUT is provided with
battery power adapter charger. The customer or user of the GoSafe Lite
should ensure that it is used in such an environment.
Electrical power quality should be
that of a typical commercial or
hospital environment.
Confidential Draft for Agency Submission Only.
Not for Posting on any Public-Facing Website
Not for dissemination to the public without the express written consent of Philips.