User Manual

Questions? Call 1-800-635-6156
Software Failure-End Device 7150 MHB
Alarm Event
Description
In the event that a device senses it has a Software Error, a
Warning Message is displayed
Priority Medium
Device Action May have limited operation, depending on the failure
Alarm Event
Reported/Displayed
Locally?
No
Alarm Event
Reported to
Lifeline?
Yes. A silent Maintenance Signal is sent to the Response
Center. Upon receiving the Maintenance Signal, the
Response Center prioritizes the response and contacts the
Subscriber to verify the status of their equipment.
[No communicator. What happens here?]
Supervision and Check-in Alarms (Informational Messages)
The alarms described below are automatically generated alarms designed to
periodically let the Lifeline Call Center know that the Pendant is working properly.
These alarms are silent and require no immediate action from the User/Subscriber.
Alarm Event Type
Auto Test Call 7150 MHB
Alarm Event
Description
Auto Test calls are automatically generated silent alarms
designed to periodically let the Response Center know that
the Pendant is working properly.
Priority N/A
Device Action Operates normally
Alarm Event
Reported/Displayed
Locally?
No visual or audible alarm is generated by the devices.
Alarm Event
Reported
to Philips Lifeline?
Yes. A silent Maintenance Signal is sent to the Response
Center by the Pendant. Upon receiving the Maintenance
Signal, the Response Center prioritizes the response
and contacts the Subscriber to verify the status of
their equipment.
draft
Confidential Draft for Agency Submission Only.
Not for Posting on any Public-Facing Website
Not for dissemination to the public without the express written consent of Philips.