User Manual

63
HomeSafe AutoAlert Button (7000AHB)
AC Voltage Source
[1]
(VAC)
N/A
DC Power Source
(VDC)
3.6 Vdc, 1200mAh
[2]
, Lithium-thionyl chloride (Li-SOCl2) Primary Battery
Type of Protection
Against Electric Shock
Class II
Degree of Protection
Against Electric Shock
Type BF Applied Part
Degree of Protection
Against Ingress of
Water
Water Resistant (1 meter, for 30 Minutes), IPX7
Mode of Operation Continuous
GoSafe Mobile Help Button (7000MHB/7100MHB)
AC Voltage Source
[1]
(VAC)
N/A for 7000MHB & 7100MHB.
Battery charger rated: 100-240Vac, 50/60Hz, 0.5A
DC Power Source
(VDC)
3.7 Vdc, 920mAh
[2]
, Lithium Ion Rechargeable
[4]
Battery
Type of Protection
Against Electric Shock
Class II
Degree of Protection
Against Electric Shock
Type BF Applied Part
Degree of Protection
Against Ingress of
Water
Water Resistant (1 meter, for 30 Minutes), IPX7
Mode of Operation Continuous
Sound Pressure Level 116-123 dB at 1 kHz (measured 1 cm from the speaker)
[1] The means of isolating the device from the supply mains is by disconnecting the device from the wall outlet.
[2] The capacity restored by the cell varies according to current drain, temperature and cut-off.
[3] Recharging of the backup battery is done automatically, as needed, when the device is plugged into an AC power outlet.
[4] Recharging of the GoSafe Mobile Button battery is done by the user as needed, when connected to the charger.
Confidential Draft for Agency Submission only. Not for Posting on any Public-Facing website
Not for dissemination to the public without the express written consent of Philips.