User Manual

52
HELP NEEDED End Device (7000MHB) out of range of Communicator
Alarm Event
Description
Help Alarm initiated by the User pressing the button on the End
Device
Priority High
Device Action Operates normally
Alarm Event Reported/
Displayed Locally?
Yes. Upon pressing the button on the End Device, a Voice Message
plays and the LED flashes red.
Alarm Event Reported
to Lifeline?
Yes. A Help Alarm Signal is sent to the Call Center by the End Device
from anywhere wireless signal is available on the AT&T wireless
network. Upon receiving the Help Signal, the Call Center calls the End
Device to establish contact with the Subscriber and to see what kind of
help they need.
HELP NEEDED End Device (7000MHB/7100MHB) out of range of
Communicator / no Signal Strength
Alarm Event
Description
Help Alarm initiated by the User pressing the button on the End
Device or by the End Device detecting a fall; and the AT&T wireless
network is unavailble. Then a Warning Message is displayed.
Priority High
Device Action The Help Alarm Signal will be sent to the Call Center once the
connection to the AT&T wireless network is re-established.
Alarm Event Reported/
Displayed Locally?
Yes. Upon pressing the button on the End Device or when the End
Device has detected a fall, a Voice Message plays and the LED flashes
red. This is an alarm that will self-cancel once connection to the AT&T
wireless network is re-established.
Alarm Event Reported
to Lifeline?
No. If the AT&T wireless network is unavailable a Help Alarm Signal
cannot be sent to the Call Center.
Confidential Draft for Agency Submission only. Not for Posting on any Public-Facing website
Not for dissemination to the public without the express written consent of Philips.