User's Manual
35
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes:
• l’appareil ne doit pas produire de brouillage
• l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d’en compromettre le fonctionnement.
Class B digital device notice
This Class B digital apparatus complies with Canadian ICES-003, RSS-Gen and
RSS-210.
Cet appareil numérique de la classe B est conforme à la norme NMB-003,
CNR-Gen et CNR-210 du Canada.
UL1635 and UL1637 Compliance
The maximum separation (range) of the equipment, under test conditions and for
comparative purposes only, is 650 feet. This range may be signicantly reduced when
the equipment is installed in a typical home.
A clear, plastic power supply retaining strip is provided in the packaging with this
system. To prevent the power supply from accidentally pulling out of the AC wall
outlet under force, plug the power supply into the outlet you select to power your
system, peel the release liner from the adhesive panels on the strip and afx it across
the back of the power supply, adhering the 2 adhesive panels to the wall on each
side of the power supply. Be sure that the adhesion area is devoid of any dirt, oil or
grease that would prevent the adhesive from sticking properly.