Operation Manual
14
4. Seat Post, Seat Post Cover, Seat Cushion, and Seat Sliding Tube Installation
Slide the Seat Post Cover (98) onto the tube of the Main Frame (1).
Insert the Seat Post (101) into the Plastic Bushing (97) on the tube of the Main Frame (1)
and then attach the Round Knob (99) onto the tube of the Main Frame (1) by turning it in a
clockwise direction to lock the Seat Post (101) in the suitable position.
Adjusting the seat height:
Turn the Round Knob (99) in a counterclockwise direction until it can be pulled out. Pull out
the Round Knob (99) and then slide the Seat Post (101) up or down direction to the suitable
position. Lock the Seat Post (101) in place by releasing the Round Knob (99) and sliding
the Seat Post (101) up or down slightly until the Round Knob (99) "pops" down into the
locked position. For added safety, tighten the Round Knob (99) in a clockwise direction.
NOTE: When adjusting the height of seat post, the maximum insert depth mark line
cannot higher than the edge of plastic bushing.
Remove three M8 Nylon Nuts (21) and Ø16xØ8x1.5 Washers (22) and from underside of the
Seat Cushion (104). Guide bolts on underside of the Seat Cushion (104) through holes on
top of the Seat Sliding Tube (103), attach with three removed M8 Nylon Nuts (21) and
Ø16xØ8x1.5 Washers (22) and tighten. Remove one Ø16xØ8x1.5 Washer (22) and Seat
Adjustment Knob (100) from underside of the Seat Sliding Tube (103). Guide bolt on
underside of the Seat Sliding Tube (103) through hole on top of the Seat Post (101), attach
with one removed Ø16xØ8x1.5 Washer (22) and Seat Adjustment Knob (100) and tighten.
Adjusting the seat forward or back:
Turn the Seat Adjustment Knob (100) to loosen the Seat Sliding Tube (103). Slide the Seat
Sliding Tube (103) forward or back to desired position and turn Seat Adjustment Knob (100)
to tighten.
NOTE: Continue to turn seat adjustment knob until seat sliding tube is secure before
exercising.
104
99
98
22
100
101
22
21
103
97
1
Multi Hex Tool with Phillips
Screwdriver S8, S13, S14, S15
Tool: