Users Manual

SCRATCH CODING KIT
Coding the Ultrasonic Turtle
Codig the Ultrasonic Turtle
Did you check that the first LED sensor turns on and off with distance?
Now try coding for the second and third LED sensors. The standard for the analog value of the first LED sensor
was '15'. Second, code the setting of the analog value of the third LED sensor as '20', '25'. Along with the analog
value criteria, the number of digital ports will of course change. If you change the output of the digital port and
the analog value slightly, you can easily create a script.
Please refer to the script you created earlier and code yourself in the space below!