Users Manual

SCRATCH CODING KIT
Before using the servomotor, connect it to the main cell using a 3-pin connector.
Connect the servomotor with the cable like above. Conncect it so that the white cable is the closest to the
servomotor’s white bump.
For the servomotor to work correctly, a special cell called servo cell has to be connected to the motor.
Look for the servo cell (shown in the picture below) and connect it to the white bump of the servomotor.
Connecting the Servomotor
Connecting the Servomotor
B
R
W
B
R
W
If everything was connected
correctly, the servomotor
should look like the picture on
your right!